|
RING FIXATOR (ILLIZAROV TYPE) |
|
INSTRUMENTS |
R7000.80 |
Half Rings 80 mm |
R7000.100 |
Half Rings 100 mm |
R7000.110 |
Half Rings 110 mm |
R7000.120 |
Half Rings 120 mm |
R7000.130 |
Half Rings 130 mm |
R7000.140 |
Half Rings 140 mm |
R7000.150 |
Half Rings 150 mm |
R7000.160 |
Half Rings 160 mm |
R7000.180 |
Half Rings 180 mm |
R7000.200 |
Half Rings 200 mm |
R7000.220 |
Half Rings 220 mm |
R7000.240 |
Half Rings 240 mm |
|
These Rings Are Different From Below Mentioned Half Rings, Having Radius At Their Edge & Having Different Hole Spacing/No. of Holes as Compared To Below Ones. |
7000.80 |
Half Rings 80 mm |
7000.100 |
Half Rings 100 mm |
7000.110 |
Half Rings 110 mm |
7000.120 |
Half Rings 120 mm |
7000.130 |
Half Rings 130 mm |
7000.140 |
Half Rings 140 mm |
7000.150 |
Half Rings 150 mm |
7000.160 |
Half Rings 160 mm |
7000.180 |
Half Rings 180 mm |
7000.200 |
Half Rings 200 mm |
7000.220 |
Half Rings 220 mm |
7000.240 |
Half Rings 240 mm |
7002.80 |
Full Rings 80 mm |
7002.100 |
Full Rings 100 mm |
7002.120 |
Full Rings 120 mm |
7002.140 |
Full Rings 140 mm |
7002.160 |
Full Rings 160 mm |
7002.180 |
Full Rings 180 mm |
7002.200 |
Full Rings 200 mm |
7004.80 |
5/8” Ring 80 mm |
7004.100 |
5/8” Ring 100 mm |
7004.120 |
5/8” Ring 120 mm |
7004.130 |
5/8” Ring 130 mm |
7004.140 |
5/8” Ring 140 mm |
7004.160 |
5/8” Ring 160 mm |
7004.180 |
5/8” Ring 180 mm |
7004.200 |
5/8” Ring 200 mm |
7004.220 |
5/8” Ring 220 mm |
7004.240 |
5/8” Ring 240 mm |
7010.140 S |
Foot Ring 140mm Short |
7010.140 L |
Foot Ring 140mm Long |
7010.160 S |
Foot Ring 160mm Short |
7010.160 L |
Foot Ring 160mm Long |
7012.40 |
Threaded Rods 40 mm |
7012.60 |
Threaded Rods 60 mm |
7012.80 |
Threaded Rods 80 mm |
7012.100 |
Threaded Rods 100 mm |
7012.120 |
Threaded Rods 120 mm |
7012.150 |
Threaded Rods 150 mm |
7012.180 |
Threaded Rods 180 mm |
7012.200 |
Threaded Rods 200 mm |
7012.250 |
Threaded Rods 250 mm |
7012.300 |
Threaded Rods 300 mm |
7012.350 |
Threaded Rods 350 mm |
7012.400 |
Threaded Rods 400 mm |
7014.40 |
Threaded Rods Slotted 40 mm |
7014.60 |
Threaded Rods Slotted 60 mm |
7014.80 |
Threaded Rods Slotted 80 mm |
7014.100 |
Threaded Rods Slotted 100 mm |
7014.120 |
Threaded Rods Slotted 120 mm |
7014.150 |
Threaded Rods Slotted 150 mm |
7014.180 |
Threaded Rods Slotted 180 mm |
7014.200 |
Threaded Rods Slotted 200 mm |
7014.250 |
Threaded Rods Slotted 250 mm |
7014.300 |
Threaded Rods Slotted 300 mm |
7014.350 |
Threaded Rods Slotted 350 mm |
7014.400 |
Threaded Rods Slotted 400 mm |
7016.40 |
Threaded Rods With Hole 40 mm |
7016.60 |
Threaded Rods With Hole 60 mm |
7016.80 |
Threaded Rods With Hole 80 mm |
7016.100 |
Threaded Rods With Hole 100 mm |
7016.120 |
Threaded Rods With Hole 120 mm |
7016.150 |
Threaded Rods With Hole 150 mm |
7016.180 |
Threaded Rods With Hole 180 mm |
7016.200 |
Threaded Rods With Hole 200 mm |
7016.250 |
Threaded Rods With Hole 250 mm |
7016.300 |
Threaded Rods With Hole 300 mm |
7016.350 |
Threaded Rods With Hole 350 mm |
7016.400 |
Threaded Rods With Hole 400 mm |
7018.02 |
Short Connecting Plates 2 holes |
7018.03 |
Short Connecting Plates 3 holes |
7018.04 |
Short Connecting Plates 4 holes |
7018.05 |
Short Connecting Plates 5 holes |
7018.06 |
Short Connecting Plates 6 holes |
7018.07 |
Short Connecting Plates 7 holes |
7018.08 |
Short Connecting Plates 8 holes |
7018.09 |
Short Connecting Plates 9 holes |
7018.10 |
Short Connecting Plates 10 holes |
7018.11 |
Short Connecting Plates 11 holes |
7020.06 |
Long Connecting Plates 6 holes |
7020.07 |
Long Connecting Plates 7 holes |
7020.08 |
Long Connecting Plates 8 holes |
7020.09 |
Long Connecting Plates 9 holes |
7020.10 |
Long Connecting Plates 10 holes |
7020.11 |
Long Connecting Plates 11 holes |
7020.12 |
Long Connecting Plates 12 holes |
7020.13 |
Long Connecting Plates 13 holes |
7020.14 |
Long Connecting Plates 14 holes |
7020.15 |
Long Connecting Plates 15 holes |
7020.16 |
Long Connecting Plates 16 holes |
7022.06 |
Long Connecting Plates With Threaded End 6 holes |
7022.07 |
Long Connecting Plates With Threaded End 7 holes |
7022.08 |
Long Connecting Plates With Threaded End 8 holes |
7022.09 |
Long Connecting Plates With Threaded End 9 holes |
7022.10 |
Long Connecting Plates With Threaded End 10 holes |
7022.11 |
Long Connecting Plates With Threaded End 11 holes |
7022.12 |
Long Connecting Plates With Threaded End 12 holes |
7022.13 |
Long Connecting Plates With Threaded End 13 holes |
7022.14 |
Long Connecting Plates With Threaded End 14 holes |
7022.15 |
Long Connecting Plates With Threaded End 15 holes |
7022.16 |
Long Connecting Plates With Threaded End 16 holes |
7024.01 |
Twisted plates 1 hole |
7024.02 |
Twisted plates 2 holes |
7024.03 |
Twisted plates 3 holes |
7024.04 |
Twisted plates 4 holes |
7026.00 |
Curved Plates |
7028.10 |
Hinge: - Male |
7028.20 |
Hinge: - Female |
7028.30 |
Hinge: - 90 Degree (Universal) |
7030.02 |
Post: - Male 2 holes |
7030.03 |
Post: - Male 3 holes |
7030.04 |
Post: - Male 4 holes |
7032.02 |
Post: - Female 2 holes |
7032.03 |
Post: - Female 3 holes |
7032.04 |
Post: - Female 4 holes |
7034.20 |
Threaded Sockets, 20 mm |
7034.30 |
Threaded Sockets, 30 mm |
7034.40 |
Threaded Sockets, 40 mm |
7034.50 |
Threaded Sockets, 50 mm |
7034.60 |
Threaded Sockets, 60 mm |
7136.01 |
Rencho Cube with 1 Hole |
7136.02 |
Rencho Cube with 2 Hole |
7136.03 |
Rencho Cube with 3 Hole |
7136.04 |
Rencho Cube with 4 Hole |
7136.05 |
Rencho Cube with 5 Hole |
7038.20 |
Bushings 20 mm |
7038.30 |
Bushings 30 mm |
7038.40 |
Bushings 40 mm |
7038.50 |
Bushings 50 mm |
7038.60 |
Bushings 60 mm |
7040.100 |
Telescopic Rods 100 mm |
7040.150 |
Telescopic Rods 150 mm |
7040.200 |
Telescopic Rods 200 mm |
7040.250 |
Telescopic Rods 250 mm |
7040.300 |
Telescopic Rods 300 mm |
7040.350 |
Telescopic Rods 350 mm |
7040.400 |
Telescopic Rods 400 mm |
7042.60 |
Graduated Telescopic Rod 60 mm |
7042.100 |
Graduated Telescopic Rod 100 mm |
7042.150 |
Graduated Telescopic Rod 150 mm |
7042.200 |
Graduated Telescopic Rod 200 mm |
7042.250 |
Graduated Telescopic Rod 250 mm |
7046.90 100 to 200 |
Italian Femoral Arch 900 X 100, 120, 140, 160, 180, 200mm |
7046.120 120 to 220 |
Italian Femoral Arch 1200 X 120, 140, 160, 180, 200, 220mm |
7048.10 |
Nuts for Threaded Rod (Ordinary) |
7048.20 |
Nuts for Threaded Rod (Special) |
7048.30 |
Nylon Insert Nut |
7048.40 |
Square Nut |
7048.50 |
Nut with Quadragonal Head |
7050.10 to 30 |
Connecting Bolt 10mm to 30mm (5mm diff.) |
7052.00 |
Wire Fixation Bolt Cannulated |
7054.10 |
Wire Fixation Bolt Slotted For 1.5 & 1.8mm Wire, Thread Length: 15mm |
7054.20 |
Wire Fixation Bolt Slotted For 2.0 & 2.5mm Wire, Thread Length: 20mm |
7056.00 |
Wire Fixation Bolt Thread End, Cannulated |
7058.00 |
Wire Fixation Bolt Thread End, Slotted |
7060.35 |
Single Pin (Schanz Screw) Fixation Bolt 3.5 |
7060.45 |
Single Pin (Schanz Screw) Fixation Bolt 4.5 |
7062.10 |
Plain Washer 1.5mm Thick (OD 12.0mm - ID 7.0mm) |
7062.20 |
Thick Washer 2 mm (OD 14.0mm - ID 7.0mm) |
7062.30 |
Thick Washer 4 mm (OD 14.0mm - ID 7.0mm) |
7064.10 |
Side Slotted Washer 3mm Thick (OD 14.0mm - ID 7.0mm) |
7064.20 |
Side Slotted Washer 4mm Thick (OD 14.0mm - ID 7.0mm) |
7066.00 |
Central Slotted Washer 3mm Thick (OD 14.0mm - ID 7.0mm) |
7068.00 |
Conical Washer 5mm Thick (OD 14.0mm - ID 7.0mm) |
7070.00 |
Split Washer 2mm Thick (OD 14.0mm - ID 7.0mm) |
7072.00 |
Side Flated Washer 4mm Thick (Dia. 12.7mm - ID 7.0mm) |
7074.00 |
Universal Joint |
7076.00 |
Oblique Support |
7078.00 |
Detachable Wire Fixation Buckle |
7080.00 |
Lengthening Tower |
7082.00 |
Multiple Pin Fixation Bolt |
7084.00 |
Adjustable Half Pin Clamp |
7086.00 |
Femoral Joint (Mono Axial) |
7088.00 |
Femoral Joint (Poly Axial) |
7090.00 |
Translation / Rotation Device |
7092.00 |
Schanz Screw Introducer with S.S. Chuck (1/4”) |
7094.00 |
Wire Tensioner Simple |
7096.00 |
Wire Tensioner Graduated |
7098.00 |
Dynametric Tensioner |
7100.10 |
Combination Wrench 10.0mm X 140mm |
7100.20 |
Two in one Spanner (Hexagonal/Square Nut) |
7100.30 |
Spanner 90 Degree 10mm (Hexagonal Nut) |
7100.40 |
Spanner 90 Degree (Square Nut) |
7100.50 |
Box Spanner For U.C. – 10 (Hexagonal Nut) |
7100.60 |
U-Joint Socket Wrench AA 10 mm (Hexagonal Nut) |
7100.70 |
Socket Wrench Adjustable Model 10mm (Hexagonal Nut) |
7100.80 |
Spanner S.S. with Fibre Handle |
7100.90 |
T-Wrench 10.0mm |
9630.10 |
SS Illizarov Box (With 2 alluminum insert trays for SS HALF RING): 53cm X 28cm X 12.5cm |
9630.20 |
SS Illizarov Box (With 2 alluminum insert trays for SMALL COMPONENTS): 53cm X 28cm X 12.5cm |
9630.30 |
SS Illizarov Box (With 2 alluminum insert trays for SMALL & MISCELLANEOUS COMPONENTS): 53cm X 28cm X 12.5cm |
